Other Insulation Materials & Ancillaries
We understand that a customer could chose to use other insulation materials not manufactured by us, but are necessary to complete the insulation requirements of the customer’s project. DEFEX by virtue of its decades long presence in the Thermal Insulation industry has access to the best product in each segment of such third-party products, through its alliance with partner-manufacturers of these products. The customers are therefore assured of the desired Quality, Handling & Delivery on very competitive terms.
Rockwool Mattress, Slabs & Pipe-sectional Insulation:
Mineral wool or Rock wool is a non-metallic, inorganic product manufactured from a carefully controlled mix of raw materials, mainly comprising either stone or silica which are heated to a high temperature until molten. The molten glass or stone is then spun and formed into a flexible, fibrous mat for further processing into finished products. The exceptional thermal, fire and acoustic properties of mineral wool derive from the mat of fibres that prevents the movement of air, and from mineral wool’s inert chemical composition.
It is a very versatile material, and can be manufactured to many different densities to give varying properties, formed in various shapes and faced with a variety of sheet materials. The range of products includes loose fibres, slabs, rolls, pre-formed and faced pipe sections, acoustic panels.
Technical Data Sheets for all Products can be downloaded. Kindly write to us on info@defex.in for any further queries.
Elastomeric Nitrile Rubber Insulation Sheets & Tubes:
Elastomeric Nitrile rubber is a versatile and flexible closed cell elastomeric insulation suitable for applications up to an approximate maximum continuous operating temperature of 105 ᵒC.
- Elastomeric products offer excellent flexibility.
Resistant to water vapour.
- Resistant to thermal transmittance properties.
Oil and acid resistant (refer toTechnical Data Sheets before installation).
- Excellent adhesive and coating receptiveness.
- Good cutting characteristics and easy to fabricate. Proper installation is critical to the insulation system’s performance.
Elastomeric Nitrile rubber is a versatile and flexible closed cell elastomeric insulation suitable for applications up to an approximate maximum continuous operating temperature of 105ᵒC.
Properties:
- Elastomeric products offer excellent flexibility.
Resistant to water vapour.
- Resistant to thermal transmittance properties.
- Oil and acid resistant (refer toTechnical Data Sheets before installation).
- Excellent adhesive and coating receptiveness.
- Dedicated assembly room for engineered parts
- Good cutting characteristics and easy to fabricate. Proper installation is critical to the insulation system’s performance.
Uses / Applications:
Elastomeric insulation or nitrile rubber products are used to
prevent condensation on refrigeration copper piping, heating
and ventilation pipe work and air-conditioning pipe work.
Heating and ventilation ductwork systems. Vessels and curved
or irregular surfaces.
Thickness
Pipe insulation: 9, 13, 19, 25 and 32mm
Roll insulation: 9, 13, 19, 25, and 32mm.
Technical Information:
Technical Data Sheets for all Products can be downloaded.
Kindly write to us on info@defex.in for any further queries.
Silica Aerogel Thermal Insulation
Aerogel is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and low thermal conductivity.
Features:
- Excellent heat insulation effect.
- Reducing the thickness of insulation layer. A high space utilization rate.
Specifications:
- Color: White / Grey
- Density: 180-220kg/m3
- Thermal Conductivity: 0.012 - 0.018w/m
- k (At 25℃)
- Resistant to Fire.
- Excellent Hydrophobicity to effectively prevent water
entering
the pipe, internal equipment.
- Convenient construction, lightweight and flexible.
- Easy to cut to adapt to different shapes of pipes
and equipment.
- Breaking Elongation: 65%
- Bending Strength: 45KP
- Compressive Strength: 32N
- Thickness: 6mm / 10mm
- Material: Fiberglass + Nano Silica Aerogel
Technical Data Sheets for all Products can be downloaded. Kindly write to us on info@defex.in for any further queries.
Aluminium Jacketing
Synthetic Rubber Adhesives:
Other Ancillaries:
